Lite series.

Series T300LX


LOA 3M 3.4M
BOA 1.55M 1.65M
Tube Dia. 0.48m 0.48m
Chambers 2 + 1 2 + 1
Max Hp 9.9hp 15HP
Rec Hp 2.5HP - 8HP 2.5HP - 9.9HP
Tubes 20KGS 22KGS
Floor 6.5KGS 8.5KGS
Transom 4.5KGS 4.5KGS
Total weight 31KGS 35KGS
Specifications subject to change without notice. All dimensions and weight measurements indicated have a tolerance of plus/minus 5% respectively. 

Bag size.


Tubes: 90cm x 60cm x 40cm

Accessories: 100cm x 60cm x 40cm


Tubes: Tough 0.9mm, 1000 denier, custom manufactured PVC. Inflate to 3psi.


Colour options;
- Light Gray / Glued seams (Standard)
- Arctic White / Welded seams (Made to order)


Air deck floor: 100mm thick, 0.8mm walls, intertwined polyester fibre, 1000 denier, custom manufactured. Plus 1mm PVC anti-skid protective layer (fabric to fabric bonding) on top of the high-pressure air deck floor for ultimate durability. Inflate to 10psi.

Takacat 10 years of quality construction and experience.

Evolutionary transom

Takacats innovative open and fully removable transom design enables the Takacat to rolled-up smaller, easier and lighter than traditional inflatable boats. A are big advantage when it comes to handling, transportation and or storage of your portable boat.


Stainless steel grade 304.

4 x stainless steel bolts.

4 x stainless steel spring washers.

4 x stainless steel standard washers.

1 x 18mm plywood outboard mount.

Standard features.  

2 x safety chambers.
2 x air pressure release valves.
High pressure removable air deck floor.

1mm PVC anti skid protective top layer on floor (fabric to fabric bonding).

Unique raised floor design.
Heavy-duty under-tube protection.
Rubbing / spray deflection rail.
Stainless steel transom (removable).

Inflatable float seat.
External oar rowlocks and valcrow straps.
External safety lines.
6 external lifting handles.
Internal D rings and grab line.
Repair kit.
Hand pump with
pressure gauge.

2 x Aluminum 2pcs oars.
2 x Carry bags.
3 Year limited warranty.


Tube Transom (R) attachment points provide a much larger surface area than a conventional fixed transom inflatable boat. Horizontal tube slots run horizontally forward and aft of the transom bar. This helps distribute the weight and power thrust of the outboard into the hulls. This in turn provides optimum power distribution for efficiency and performance. A fabric to fabric bonding system with no PVC transom sleeve prone to UV and folding damage commonly used in solid transom inflatable boats.

Easy re-tube.

Unlike conventional ribs or inflatable boats Takacats can be re-tubed simply and cost effectively due to our revolutionary tube transom (R). Our fully removable high-pressure air deck floor system, and tubes are not fixed or glued to a hull or transom. There is no hassle or costly process to have your aged or damaged tubes re-made and re-glued to the hull. You just simply order a set of new tubes direct from Takacat.



Floor construction.

Takacat's removable high-pressure (10psi) air deck floor system
 is very rigid, absorbs impact and also provides a real comfort factor under foot.


A thicker and more rigid air deck floor system was introduced during 2015. New for 2016 / 2017 Takacat has started custom production of a unique anti skid protective top layer with UV additive. A very strong fabric to fabric bonding system that provides additional protection to the high-pressure floor. Ideal for fishing and everyday boating use.

Set up.
View video >


Pack down.
View video >


Performance tips


The use of a Hydrofoil plate can provide some great advantages including fuel economy, stability and tracking. We have found Permatrim Hydrofoils a very good match for the Takacat hulls.

Have your propeller cupped. This is a technique used to enhance the performance of propellers under certain conditions, in this case a tunnel hull.

Outboard heights, if you experience any water kick back, it's most likely that your outboard is too deep in the water. Simply raise your outboard with a wedge until you find the optimum running height for your outboard / load / boat set-up. Alternatively, a foam wedge (or similar) under the floor at base of transom will have the same effect.


The right blend.

Takacat, a New Zealand designed, developed and tested range of versatile catamaran inflatable boats custom-built in China using quality components from around the world.

Print Print | Sitemap
© Air Yacht Ltd 2017